CaraScot
Scottish Export 80/- • Extract • 18.93 L
I will brew this one tomorrow. I'll let you know the results!
September 18, 2009 pm 03:37pm
Ingredients (Extract, 18.93 L)
- 0.10 kg
Crystal 75; Bairds Malt
Crystal 75; Bairds Malt
Crystal or Caramel malts have a distinctive toffee flavour, which becomes more intense as colour is increased, and at the higher end of the colour range burnt or roasted malt flavours may begin to appear. Traditionally in the UK, Crystal malt of colour 70 -80 °ASBC has been used at about 5% of the grist to give the characteristic colour and flavour of UK Bitters and Pale Ales. Adjustment of the amount and/or colour of the Crystal malt may brew some very distinctive beers, but this may require some careful experimentation. Crystal malts have been used in the brewing of Lager beers, but considerable care is required to ensure that whilst a distinctive flavour is achieved, the crystal flavour and colour does not become too dominant. In all beers they can help prevent the formation of oxidised (cardboard) flavours.
- 0.13 kg
Cara-Pils® Malt; Briess
Cara-Pils® Malt; Briess
Characteristics & Applications: • The endosperm is completely glassy and will appear to be darker than standard Brewers Malt. • Carapils® is a very unique dextrine-style malt that adds body, foam retention, and beer stability without influencing color or flavor. • Use to upgrade all types of beer, including light colored beers. • The non-fermentables in Carapils® are very advantageous in balancing body and flavor of dark colored beers. • May be used with or without other specialty malts. • Low usage of 1-5% will help achieve desired results. • Produced from AMBA/BMBRI recommended 2-Row Malting Barley varieties.
- 0.03 kg
Roast Barley; Bairds Malt
Roast Barley; Bairds Malt
This product is used in the production of dry or bitter Stouts and other dark beers, or for the careful adjustment of Pilsen beer colours. A different, slower roasting temperature profile is used but the final temperature is 220°C or even higher, which is achieved by allowing the exothermic roasting reactions to continue after turning off the heat source. The reaction is stopped by quenching with water. Because of the high temperature at the end, colour pick-up at this stage is very rapid and extreme care is needed to prevent carbonisation. Because the roasting process is slightly different from that used for Roast malt and a higher final temperature is used, the balance of pyrazines to pyrroles is different, with there being more pyrazines present in this product. This leads to a more bitter flavour and the use of the material in the so-called bitter Stouts. With extreme care it can also be used to colour and flavour Lager beers, but the quantities used are very small, certainly no more than 2 or 3 Kg in 1 tonne of grist.
- 2.33 kg
Dry Amber Extract
Dry Amber Extract
Cream-colored and full-flavored; will produce amber colored beers such as pale ales, IPAs, and bitters. Made of pale and crystal malts.
- 45.00 g
Fuggle - 4.0 AA% pellets; boiled 60 min
Fuggle
Mild. Mainly used for finishing and dry hopping especially pale ales, porters, and stouts. Aroma is mild and pleasant, spicy, and soft.
- 1 tsp
Irish Moss - (omitted from calculations)
Irish Moss
-
Wyeast 1728 Scottish Ale™
Wyeast 1728 Scottish Ale™
Ideally suited for Scottish-style ales, and high gravity ales of all types.
Style (BJCP)
Category: 9 - Scottish and Irish Ale
Subcategory: C - Scottish Export 80/-
| Range for this Style | |||
|---|---|---|---|
| Original Gravity: | 1.048 | 1.040 - 1.054 | |
| Terminal Gravity: | 1.013 | 1.010 - 1.016 | |
| Color: | 14.4 SRM | 9 - 17 | |
| Alcohol: | 4.6% ABV | 3.9% - 5% | |
| Bitterness: | 28.0 IBU | 15 - 30 |
