Products
BeerTools Pro 2.1 Download (macOS)
$24.95 USD
$3 USD
BeerTools Pro 2.1 Download (Linux)
$24.95 USD
Master Brew Red Hook Clone
Extra Special/Strong Bitter (English Pale Ale) • Extract • 5 gal
PROCEDURES RECOMMENDATION: READ THESE INSTRUCTIONS FROM BEGINNING TO END BEFORE YOU BEGIN. ALL TEMPERATURES LISTED ARE FAHRENHEIT. A. Following the cleanser package instructions, thoroughly clean and sanitize these items using No-Rinse cleanser: Primary fermenter Lid Airlock Hydrometer Heat-tolerant spoon Laboratory or floating thermometer B. Pour two gallons of clean water into a 4 gallon or larger pot. If included in your recipe, pour crushed grains into the cloth bag and tie the end into a knot to close it. If crushed grains are not included, go to Step C. Place the grain- filled bag into the brewpot water and heat to approximately 160o - 170o. DO NOT BOIL THE GRAINS. Carefully remove the grain bag and allow it to drain into the brewpot without squeezing. Discard the grain-filled bag. C. Heat the brewpot water to boiling. Add malt extract syrup and/or dry malt extract. Stir constantly until it returns to a boil. If your recipe includes Malto Dextrin or Rice Syrup Solids, add at this time. Add bittering hops. Be careful not to let the pot boil over. Boil for 55 minutes, stirring occasionally, then add finishing hops. Boil for an additional 5 minutes (total boiling time is 60 minutes). *** Note - liquid malt extract will pour easier if you first place the tin in a pan of hot water for 10-15 minutes. D. Cool the wort rapidly to 70o. Temperature can be monitored by adhering the liquid crystal thermometer to the outside of the fermenter. *** Note - cooling can be done quickly by immersing the fermenter into a tub of cold water. Other methods are available to the homebrewer. Ask your homebrew retailer for advice and instructions regarding wort cooling. E. Pour or siphon brewpot contents into a sanitized 6.5 gallon food grade plastic fermenter, leaving sediment (trub) behind. Add 3 gallons 70° or lukewarm water until the level reaches the 5 gallon mark on the bucket. F. Sanitize a hydrometer and take the Original Gravity (O.G.) reading. Write down this number for future reference. Sprinkle the contents of the yeast packet on top of the wort and stir well. Secure the lid on the fermenter with the airlock in place (approximately half filled with clean water). G. Place the fermenter in a warm area to maintain a temperature of 68o - 72o. Keep the fermenter away from sunlight and fluorescent lights. You should notice bubbling in the airlock within 24 hours. Bubbling will slow down significantly and then stop completely after 3 to 7 days. When bubbling has stopped, remove the lid, sanitize a hydrometer and take the Final Gravity (F.G.) reading. Write down this number for future reference. If this reading matches the F.G. reading specified for your recipe, go to Step H. If the reading is higher than the reading specified in your recipe, place the lid back onto the fermenter and allow fermentation to continue for another few days. *** Optional - a process called secondary (or two-stage) fermentation may be used at this point to improve beer clarity. Consult your homebrew retailer for advice regarding secondary fermentation. Note: In preparation for bottling, we recommend against the use of twist-off bottles. Use standard crown top or returnable bottles only. Make sure bottles are clean, inside and out. Use a bottle brush to remove stubborn deposits. Following the cleanser package instructions, thoroughly sanitize the bottles using No-Rinse cleanser immediately before bottling. H. Following the cleanser package instructions, thoroughly clean and sanitize these items using No-Rinse cleanser: 6.5 gallon bottling bucket and spigot Siphon tubing Racking cane Bottle filling wand (53) 12 ounce bottles (53) Brewer's Best Crown caps In a small saucepan, dissolve 5 oz. priming sugar into 2 cups of clean water and boil for 5 minutes. Pour this mixture into the bottling bucket. Siphon the beer from the primary fermenter into the bottling bucket. The siphoning action should thoroughly blend the beer and the sugar solution. Fill bottles using the siphon tubing connected to the spigot at one end and the bottling wand at the other. Bottles should be filled to approximately one inch from the top. Cap the bottles. I. The sugar addition in Step H will produce natural carbonation in your beer. This process will take up to two weeks at room temperature. The beer should be stored in a dark place at 65o - 75o to ensure proper carbonation. For best flavor, age the beer an additional 21 days. Aging times will vary, depending on the type of beer brewed and your personal taste. Sit back and enjoy your just reward - QUALITY HAND CRAFTED BEER! Always consult your local homebrew retailer if you have any questions regarding this product. Call 877-238-3100 http://stores.ebay.com/WINEBEERANDCOLLECTIBLES
January 17, 2007 pm 03:06pm
0.0/5.0 0 ratings
Ingredients (Extract, 5 gal)
- .75 lbs
Belgian Cara-Pils
Belgian Cara-Pils
Significantly increases foam/head retention and body of the beer.
- .75 lbs
Crystal Malt 60°L
Crystal Malt 60°L
Sweet caramel flavor, deep golden to red color. For dark amber and brown ales.
- .25 lbs
American Caramel 20°L
American Caramel 20°L
Provides color, body, and contributes to foam retention and beer stability.
- 2 lbs
Dry Light; Muntons
Dry Light; Muntons
Used as the base for a wide variety of styles of beers, including lager, pale ales, bitters, and export bitters. Contains no colored malts.
- 3.3 lbs
Premier Gold Liquid
Premier Gold Liquid
A light- to medium-bodied lager or ale of yellow to gold color.
- 1.75 oz
Willamette - 5.0 AA% pellets; boiled 60 min
Willamette
This hop is used for finishing and dry hopping American and British style ales. Aroma is mild and pleasant ans slightly spicy
- .25 oz
Willamette - 5.0 AA% pellets; boiled 15 min
Willamette
This hop is used for finishing and dry hopping American and British style ales. Aroma is mild and pleasant ans slightly spicy
- 0.50 oz
Tettnanger - 4.5 AA% pellets; boiled 1 min
Tettnanger
Mild, slightly spicy. 'Noble'.
- 5 oz
Priming Sugar - (omitted from calculations)
Priming Sugar
-
Danstar Nottingham
Danstar Nottingham
The Nottingham strain was selected for its highly flocculant & relatively full attenuation properties. It produces low concentrations of fruity and estery aromas and has been described as neutral for ale yeast, allowing the full natural flavor of malt & hops to develop. The recommended fermentation temperature range of this strain is 14° to 21°C (57° to 70°F) with good tolerance to low fermentation temperatures (12°C/54°F) that allow this strain to be used in lager-style beer. With a relatively high alcohol tolerance, Nottingham is a great choice for creation of higher-alcohol specialty beers!
Notes
If you need wholesale beer making ingredients please give us a call at 877-238-3100
Style (BJCP)
Category: 8 - English Pale Ale
Subcategory: C - Extra Special/Strong Bitter (English Pale Ale)
| Range for this Style | |||
|---|---|---|---|
| Original Gravity: | 1.049 | 1.048 - 1.060 |  |
| Terminal Gravity: | 1.013 | 1.010 - 1.016 | |
| Color: | 14.0 SRM | 6 - 18 | |
| Alcohol: | 4.7% ABV | 4.6% - 6.2% | |
| Bitterness: | 34.3 IBU | 30 - 50 | |
Discussion
Post a Comment
Recently Added
Recently Reviewed
Special/Best/Premium Bitter : All Grain
Recipe from Goddard's Brewery, Isle of Wight UK. Typical english bitter with a hint of toffee flavor and smell from the...
20L strike and 25L boil? How long for the mash - 60mins?
2024-11-15 6:03pm
Spotted Tongue 2024 Summer Saison
Saison : All Grain
Trying Lallemand Farmhouse Hybrid Saison yeast for the first time.
Finished a little sweet for a Saison, next time omit the Munich and/or Melanoidin malt. The Lallemand Farmhouse Hybrid...
2024-10-26 7:15pm
Blonde Ale : All Grain
Does adding toasted bread to the mash affect outcome?
The answer appears to be no, adding toasted bread did not seem to add any bready or toasty notes to the beer. It is an...
2024-10-26 7:05pm