BeerTools vs. ProMash

General brewing information, questions and discussion. Topics that do not seem to fit elsewhere.

Moderators: slothrob, 2row

BeerTools vs. ProMash

Postby donshizzles » Mon Nov 17, 2008 11:15 am

Any comparisons? Any thoughts on the best home brew software on the market?
donshizzles
Light Lager
Light Lager
 
Posts: 14
Joined: Sun Nov 16, 2008 5:53 pm

Postby jawbox » Mon Nov 17, 2008 1:39 pm

depends on what you are looking for. In my opinion BTP is a fantastic program for all grain brewing. Promash is also good although the interface is a little cumbersome and dated.

You could try the demo version and see which you prefer.

Later,
Jaw
iMac 27", 3.4 GHz Intel Core i5, 8GB Ram, Mac OSX 10.12.6
iPhone 7+
iPad Pro 10.5
I like macs ;)
User avatar
jawbox
Imperial Stout
Imperial Stout
 
Posts: 525
Joined: Fri Oct 27, 2006 1:43 pm
Location: W. Dundee

Promash vs Beer Tools Pro

Postby sandman » Tue Nov 18, 2008 5:14 pm

I am new to this forum and probably can't find the appropriate link. I have used Promash for the past 18 months on my wife's PC. I got Beer Tools for use on my Mac. ProMash has a function that will estimate of the OG while you are formulating a receipe. I can't seem to find that function with Beer Tools. Is it there and I'm too dumb to find it?

Dennis Keeton
Oxygen is bad?
sandman
 
Posts: 5
Joined: Sun Nov 16, 2008 4:01 pm
Location: Greensboro, NC

OG estimate

Postby slothrob » Tue Nov 18, 2008 11:18 pm

If you have the Analysis tab selected just below the section where you enter the recipe, the OG will appear a little bit below that tab as you enter ingredients into the recipe.
Last edited by slothrob on Fri Nov 21, 2008 8:06 pm, edited 2 times in total.
BTP v2.0.* Windows XP
User avatar
slothrob
Moderator
Moderator
 
Posts: 1834
Joined: Mon Apr 10, 2006 1:36 pm
Location: Greater Boston

Postby sandman » Thu Nov 20, 2008 7:31 pm

I have found the recipe calculator online and it is doing what I want. However, while off line the analysis tab calculates SRM, IBU without any problem. The OG that I see in the analysis tab is around 1.010 with a grain bill of 11.5 lb of grain. As I said, the online calculator works well. Off Line it looks as if I need to enter actual values.

Cheers,
Dennis
Oxygen is bad?
sandman
 
Posts: 5
Joined: Sun Nov 16, 2008 4:01 pm
Location: Greensboro, NC

Volume

Postby slothrob » Fri Nov 21, 2008 8:08 pm

What volume do you have entered into Final Volume? 30 gallons, maybe?
BTP v2.0.* Windows XP
User avatar
slothrob
Moderator
Moderator
 
Posts: 1834
Joined: Mon Apr 10, 2006 1:36 pm
Location: Greater Boston

Postby sandman » Fri Nov 21, 2008 9:20 pm

Kettle volume is 6.96 gallon
Wort boil Duration 1.5 hr
Evaporation loss 2.25 gal
Water vol added 0.0
Final Vol @68 degrees 4.52

OG,TG,,and Alcohol areto the far left of the bar figureColor and Bitterness corespond with the online calculator.

Must I be on line to have the functionality of the beer tools?

I'm brewing tomorrow, wish me luck.
Cheers,
Dennis
Oxygen is bad?
sandman
 
Posts: 5
Joined: Sun Nov 16, 2008 4:01 pm
Location: Greensboro, NC

BTP

Postby slothrob » Sat Nov 22, 2008 3:06 am

No, you don't need to be online to use BeerTools Pro.

What do you have your Efficiency set to?
BTP v2.0.* Windows XP
User avatar
slothrob
Moderator
Moderator
 
Posts: 1834
Joined: Mon Apr 10, 2006 1:36 pm
Location: Greater Boston

Postby sandman » Sat Nov 22, 2008 9:11 am

the eff is set to 70%

Cheers,
Dennis Keeton
Oxygen is bad?
sandman
 
Posts: 5
Joined: Sun Nov 16, 2008 4:01 pm
Location: Greensboro, NC

Postby sandman » Sat Nov 22, 2008 10:05 pm

I finished my brew day. I decided to start over and reinput the recipe I had been having so much trouble with. The analysis worked without a hitch with all of the sliders being in the style guideline range. I don't know what the deal is. I input everything as I had done earlier. This time the program worked as advertised. I don't see how it could have been operator headspace, but ...it worked this time. I'll have to do more study. It's a good thing I plan on brewing next weekend.
Oxygen is bad?
sandman
 
Posts: 5
Joined: Sun Nov 16, 2008 4:01 pm
Location: Greensboro, NC

Postby slothrob » Sun Nov 23, 2008 12:41 pm

Glad it worked out. Hopefully it's a one time glitch.
BTP v2.0.* Windows XP
User avatar
slothrob
Moderator
Moderator
 
Posts: 1834
Joined: Mon Apr 10, 2006 1:36 pm
Location: Greater Boston


Return to General

Who is online

Users browsing this forum: Google [Bot] and 1 guest

cron