BeerTools Pro Bug Reports Archive B
Ingredient Window Behavior..
Sometimes I'll list more than 1 yeast that can be used in a recipe, and they are usually displayed on the bottom of the ingrediant list of the ingrediant window.
When I uncheck any ingrediant that is lower on the list, the window refreshes and the focus jumps back to the first item listed in the list. I am always forced to scroll down the list to be able to view the change or to make other changes. Is there a way to prevent this change of focus from jumping to the top of the list whenever a checkbox is de-selected or selected from an item that resides lower in the list?
I find this behaviour quite annoying to have to scroll down every time I make a change in my ingrediant selection.
BTP 1.5.4b
(_)3
Reviewed.
ahhh...nevermind, i see that if I select the ingrediant first then check or uncheck, the focus stays where it should be. I was just checking and unchecking certain items without selecting them first..then after the click, the focus would jump to the default selected item, usualy the first one in the list.
I guess i'm too fast to write..sorry!
When I uncheck any ingrediant that is lower on the list, the window refreshes and the focus jumps back to the first item listed in the list. I am always forced to scroll down the list to be able to view the change or to make other changes. Is there a way to prevent this change of focus from jumping to the top of the list whenever a checkbox is de-selected or selected from an item that resides lower in the list?
I find this behaviour quite annoying to have to scroll down every time I make a change in my ingrediant selection.
BTP 1.5.4b
(_)3
Reviewed.
ahhh...nevermind, i see that if I select the ingrediant first then check or uncheck, the focus stays where it should be. I was just checking and unchecking certain items without selecting them first..then after the click, the focus would jump to the default selected item, usualy the first one in the list.
I guess i'm too fast to write..sorry!
Visit my blog @ http://www.wottashomebrewblog.blogspot.com
On Tap:
HL Pale Ale
HL Lite Lager
Bottled:
HL Simcoe Pale Ale
HL Wizeguy Weizenbock
HL Reveur Saison
HL Dry Stout
HL Kentucky Common
On Tap:
HL Pale Ale
HL Lite Lager
Bottled:
HL Simcoe Pale Ale
HL Wizeguy Weizenbock
HL Reveur Saison
HL Dry Stout
HL Kentucky Common
I just changed my preferences to display hops in grams, but my existing recipes are all still showing hops in ounces. (1.5.4b) If I create a new recipe, it shows as grams.
Edit: this seems to apply to all "measurement" preferences that apply to ingredients. (Changing color measurement model, for example, updates on existing recipes, but changing fermentables from lbs to ozs doesn't update.)
Edit: this seems to apply to all "measurement" preferences that apply to ingredients. (Changing color measurement model, for example, updates on existing recipes, but changing fermentables from lbs to ozs doesn't update.)
Nathan
v1.5.2
1.83 GHz Intel Core 2 Duo Macbook | 2.0 gig DDR2 RAM | Boot ROM MB21.00A5.B07 | SMC Version 1.13f3 | 1280x800 | OSX 10.4.11
v1.5.2
1.83 GHz Intel Core 2 Duo Macbook | 2.0 gig DDR2 RAM | Boot ROM MB21.00A5.B07 | SMC Version 1.13f3 | 1280x800 | OSX 10.4.11
This is correct. If you want to convert an existing recipe to another set of units, you may use the Recipe->Convert Units tool.dasein668 wrote:I just changed my preferences to display hops in grams, but my existing recipes are all still showing hops in ounces. (1.5.4b) If I create a new recipe, it shows as grams.
Edit: this seems to apply to all "measurement" preferences that apply to ingredients. (Changing color measurement model, for example, updates on existing recipes, but changing fermentables from lbs to ozs doesn't update.)
Jeff
BeerTools.com Staff
BeerTools.com Staff
Shopping Lists
Yeast does not seem to be showing up in my ingredients/shopping list even though I don't have the yeast in question in stock. (I also question whether or not yeasts are going to get deducted from inventory, if I have them in inventory, though I haven't tested this.)
Nathan
v1.5.2
1.83 GHz Intel Core 2 Duo Macbook | 2.0 gig DDR2 RAM | Boot ROM MB21.00A5.B07 | SMC Version 1.13f3 | 1280x800 | OSX 10.4.11
v1.5.2
1.83 GHz Intel Core 2 Duo Macbook | 2.0 gig DDR2 RAM | Boot ROM MB21.00A5.B07 | SMC Version 1.13f3 | 1280x800 | OSX 10.4.11
2 display issues with ingredients
1) At certain times when an item is in the ingredient list, the quantity field is not readable as the font is white and background is extremely light. When the row is selected, this is not a problem as the background becomes a dark brown and black or white text appears clearly.
2) The text in the description can extend beyond the window size. Mousing over does not prompt a text box to show full text. I could stretch the column to show most of the information usually. I couldn't see how to see the rest of the information. This may be a feature request rather than bug. I couldn't decide.
See the screenshot below:
Using 1.5.5
Reviewed.
2) The text in the description can extend beyond the window size. Mousing over does not prompt a text box to show full text. I could stretch the column to show most of the information usually. I couldn't see how to see the rest of the information. This may be a feature request rather than bug. I couldn't decide.
See the screenshot below:
Using 1.5.5
Reviewed.
Main: Asus P5B Dlx with e6600 (Conroe), 2GB Ram, Nvidia 7600GS, 1280x1024, Fully updated Ubuntu 8.04 w/ Backports repository enabled (64bit version), 1.5.11 beta installed, Sun Java-6
Re: Shopping Lists
Ummm. Right. Never mind. User error.dasein668 wrote:Yeast does not seem to be showing up in my ingredients/shopping list even though I don't have the yeast in question in stock. (I also question whether or not yeasts are going to get deducted from inventory, if I have them in inventory, though I haven't tested this.)
Yeast/Shopping Lists/Inventory is actually working fine.
Nathan
v1.5.2
1.83 GHz Intel Core 2 Duo Macbook | 2.0 gig DDR2 RAM | Boot ROM MB21.00A5.B07 | SMC Version 1.13f3 | 1280x800 | OSX 10.4.11
v1.5.2
1.83 GHz Intel Core 2 Duo Macbook | 2.0 gig DDR2 RAM | Boot ROM MB21.00A5.B07 | SMC Version 1.13f3 | 1280x800 | OSX 10.4.11
Maybe I'm doing something wrong....
I just tried to change the Malt Water Absorbtion setting in the preferences, but when I click ok the figure reverts to the original setting.
Fixed in version 1.5.6.
I just tried to change the Malt Water Absorbtion setting in the preferences, but when I click ok the figure reverts to the original setting.
Fixed in version 1.5.6.
Nathan
v1.5.2
1.83 GHz Intel Core 2 Duo Macbook | 2.0 gig DDR2 RAM | Boot ROM MB21.00A5.B07 | SMC Version 1.13f3 | 1280x800 | OSX 10.4.11
v1.5.2
1.83 GHz Intel Core 2 Duo Macbook | 2.0 gig DDR2 RAM | Boot ROM MB21.00A5.B07 | SMC Version 1.13f3 | 1280x800 | OSX 10.4.11
Apparently, you need to type in the change, hit <return> to get the cursor out of the number field, then hit OK. If you don't hit <return> the change doesn't take.dasein668 wrote: I just tried to change the Malt Water Absorbtion setting in the preferences, but when I click ok the figure reverts to the original setting.
BTP v2.0.* Windows XP
Ok, that seems to work.slothrob wrote:Apparently, you need to type in the change, hit <return> to get the cursor out of the number field, then hit OK. If you don't hit <return> the change doesn't take.dasein668 wrote: I just tried to change the Malt Water Absorbtion setting in the preferences, but when I click ok the figure reverts to the original setting.
Nathan
v1.5.2
1.83 GHz Intel Core 2 Duo Macbook | 2.0 gig DDR2 RAM | Boot ROM MB21.00A5.B07 | SMC Version 1.13f3 | 1280x800 | OSX 10.4.11
v1.5.2
1.83 GHz Intel Core 2 Duo Macbook | 2.0 gig DDR2 RAM | Boot ROM MB21.00A5.B07 | SMC Version 1.13f3 | 1280x800 | OSX 10.4.11
Schedule display changes
When the schedule is displayed, clicking the up or down arrow on the attenuation field above, the Final Temp, Available, and Collected columns change to inappropriate values.
Reviewed.
Reviewed.
Dell Latitude Laptop. Intel Pentium 1.73GHz, 512MB ram, Linux kernel 2.6, Ubuntu 7.04
-
- Light Lager
- Posts: 15
- Joined: Mon Jan 21, 2008 3:13 pm
- Location: Up !@#$ Creek
- Contact:
control Z (undo) crash 1.5.4
When I was editing a recipe I clicked the wrong button to and created a new recipe (I hit the plus sign) I then automatically pressed ctrl-z and the app stopped. This was on vista home premium.
Reviewed.
Reviewed.
Beer is proof that God loves us and wants us to be happy. - Ben Franklin
System Specs
1GB Ram
1.7ghz duo core AMD Athlon 64
Windows Vista Home
Also misc linux boxes running Ubuntu and Redhat.
System Specs
1GB Ram
1.7ghz duo core AMD Athlon 64
Windows Vista Home
Also misc linux boxes running Ubuntu and Redhat.
-
- Light Lager
- Posts: 11
- Joined: Tue Feb 05, 2008 5:47 pm
-
- Light Lager
- Posts: 11
- Joined: Tue Feb 05, 2008 5:47 pm
Recipes of the same name, different brew dates won't save. Pops up the error "Another recipe of that same name already exists." However, I have numerous duplicates of the same name, different date previously stored in the folder. (Basically, the folder is a brew-log that I sort by date).
Reviewed.
Reviewed.
15" MBP 2.4GHz Core 2 Duo, 2GB RAM, 1440 x 1200, OSX 10.5.3
Priming carbonation rates
I'm not sure if this is a bug or just my lack of knowledge. I've been switching through several recipes looking at the amount of corn sugar to add to have a CO2 volume of 2.5 (just picked that value). At 68F with 5.0 gallons I would get 4.02, 4.11, 4.38, and 4.4 specifically for each recipe. For instance I have two different recipes at 5.0 gals, 68.0F, and SG = 1.016. One would be 4.38oz and the other would be 4.02oz for 2.5 volumes of CO2. Am I missing something here? Are there more variables that I'm not aware of?
Edited: Testing 1.5.6
Reviewed.
Edited: Testing 1.5.6
Reviewed.
Bob
PC: I7-3770S CPU, Windows 8.1 Pro 64-bit, 12 GB RAM, 1 TB HDD, 1920x1080 HD touchscreen
PC: I7-3770S CPU, Windows 8.1 Pro 64-bit, 12 GB RAM, 1 TB HDD, 1920x1080 HD touchscreen