Yeast

What went wrong? Was this supposed to happen? Should I throw it out? What do I do now?

Moderator: slothrob

Post Reply
jhessler
Posts: 1
Joined: Thu Feb 22, 2001 9:18 pm

Yeast

Post by jhessler »

I brewed yesterday. as of now i have no yeast activity.
any suggestions
Okami
Light Lager
Light Lager
Posts: 19
Joined: Wed Dec 27, 2000 11:47 pm

Wait then re-pitch

Post by Okami »

I would watch it until Tuesday or even Wednesday
evening. Check your temperature, it may be too
cold. If you have no activity start some new yeast
and re-pitch.
I had this happen once with dry yeast. I assume
that the yeast was bad. I made a small bit of wort
with a 1/2 cup or so of DME and a small pan of water.
Then I re-hydrated some yeast being careful to boil
and cool the water to proper temperature. I put the
re-hydrated yeast into the small ammount of wort
and watched for action. It started to work in about
an hour or so. I pitched this into my original
wort and everything turned out fine.
Surfing for information I have found a few reasons
that yeast will not start working. All the sites
advise making a starter to grow a large healthy
batch of yeast to pitch. I have been saving almost
all of the yeast from my secondary to use in succeeding
batches. (thanks maltvault for that advice)
It keeps pretty well for a while in the fridge
in a pickle jar. I have between 8 to 10 ounces
to pitch each time this way.
User avatar
lathe
Double IPA
Double IPA
Posts: 184
Joined: Tue Jan 11, 2000 10:18 pm
Location: Bethel, CT, US
Contact:

Is it tight

Post by lathe »

Some yeast is more sensitive..it will wait until the perfect conditions (such as temperature and peak chemical reaction) are taking place. You might also want to make sure that if you are using a bucket that it is tighly sealed. But I imagine by now the yeast activity has started.
Post Reply