King Kooker Model#
Moderator: slothrob
King Kooker Model#
Anyone using a burner with a sanke keg can tell me the model to use.
Big BTU's
It's all about the BTU's The higher the better. You'll want at least 150k. If you can find 175k-180k that's great. I don't think I've seen a unit higher than that. No specific model number, these things are a dime a dozen. Costco, Wal-Mart, etc. cleverly disguised as turkey friers.
- Push Eject
- Double IPA
- Posts: 233
- Joined: Wed Mar 21, 2001 1:01 pm
- Location: Lancaster, CA, US
- Contact:
Dude -- where?!
Alright, Eric, where do you find those?!
Ollie
Ollie
- Mesa Maltworks
- Strong Ale
- Posts: 477
- Joined: Tue Sep 11, 2001 11:16 pm
- Location: Georgetown, Grand Cayman Island
Sources...
I couldn't get ahold of the industrial supplier that I got my burner from, but a quick seach resulted in:
http://www.morebeer.com/
Search for model #H210. This burner looks like it was made by the same manufacturer as mine. The only differences I could tell are it is 200,000 Btuh (mine is 225K) & 21 jets (mine has 24) and it is $69 (mine was $89). They do offer a propane fired model, but I would not use it unless you have a bulk tank ! You would go through a ton of little tanks. Besides, natural gas delivers at a higher pressure and you get more Btuh/# gas and it is MUCH cheaper.
Eric
http://www.morebeer.com/
Search for model #H210. This burner looks like it was made by the same manufacturer as mine. The only differences I could tell are it is 200,000 Btuh (mine is 225K) & 21 jets (mine has 24) and it is $69 (mine was $89). They do offer a propane fired model, but I would not use it unless you have a bulk tank ! You would go through a ton of little tanks. Besides, natural gas delivers at a higher pressure and you get more Btuh/# gas and it is MUCH cheaper.
Eric
- Mesa Maltworks
- Strong Ale
- Posts: 477
- Joined: Tue Sep 11, 2001 11:16 pm
- Location: Georgetown, Grand Cayman Island
225K Burners....
The highest rated burner I've seen is 225,000 Btuh. They are cast iron, have 24 brass jets in a staggered concentic circle, weigh around 18 pounds and cost me $89 each. I use 3 of these on my pico system when I brew outside. They come orificed for natural gas. They make a high pitched, fairly loud, "jet plane-like" roar unlike the lower pitched roar that the turkey friers make. You have to be very careful when mashing with one of these babys! Since they can bring 1 bbl. (31 US Gal.) of wort to boil in ~12 minutes, you can imagine how fast they could scorch a mash! Good full port ball valves do a good job of reining in the power adequately.
Eric
Eric
Understand
The reason why i'm asking is that my brewshop has one
of those king kooker but the keg didn't fit on it, the ring was too big.thanks for your info.HappyBrewing!
of those king kooker but the keg didn't fit on it, the ring was too big.thanks for your info.HappyBrewing!