grain mill drawings??
Moderator: slothrob
grain mill drawings??
anyone know where to get some drawings for an adjustable mill? I have a machinest friend but lack the skills to come up with good enough plans.
-
- Strong Ale
- Posts: 339
- Joined: Sat Mar 17, 2001 11:33 pm
- Location: Hummelstown, PA, US
Sure
I made my own and if I can find the drawings I will be more than happy to pass them along to you. Just reply with your email address, and if you dont want to post it here, you can send me a message at edthedart@netscape.net . I got my "vision" from an article on this site, click on the link, and you can see pretty much what I made. Jeff wouldn't share any measurements with me so I just pulled some #'s out my !@# and came up with a mill. It works very well, plus I made it!!! Thats always a bonus. Here's the link http://www.beertools.com/html/articles/mill.shtml
so just let me know and I will do my best to help you out with it.
Ed
so just let me know and I will do my best to help you out with it.
Ed
thanks
thanks I did look at that and I am a woodworker at heart but once again my time is very little. I would love to see what you have for drawings. Thanks again.
bobcanning@softhome.net
bobcanning@softhome.net
-
- Strong Ale
- Posts: 339
- Joined: Sat Mar 17, 2001 11:33 pm
- Location: Hummelstown, PA, US
Hey Jeff
Do you remember when I asked you for some measurements so that I could make a grain mill, you said you couldn't tell me because it was "proprietary" info and that you were going to sell them as kits. Do you have those kits available??? I think the canman may be a customer
The store.
Working on the BeerTools.com store right now! Maybe after it's up, some of these ideas can finally come to fruition.
As BeerTools continues to grow
For now, BeerTools will open an online retail store; but the site continues to grow and may include other forms of trade in the future.