anybody have good sanke keg dimensions for proper volume?
7 posts
• Page 1 of 1
anybody have good sanke keg dimensions for proper volume?
I was trying to add vessels to my session, but I don't really have the internal measurements of a sanke keg. What do you all use? Using the height of the outside of the entire keg yields a calculation of about 22.8 gallons. What do you use as a height to give 15.5 gallons?
Steve
Steve
 Steve973
 Light Lager
 Posts: 26
 Joined: Sun Sep 03, 2006 11:34 am
Ok, I'll reply to myself since the calculation is pretty easy, and I'm actually a little embarrassed for not realizing it earlier. Obviously, getting the volume of a keg is basically figuring out the volume of a cylinder, which is given by
pi * radius squared * height
Since a sanke keg is 15.5 gallons, and one gallon is darn close to 231 cubic inches, 15.5 gallons is 3580.5 cubic inches
3.14 * 8.5 squared * height = 3580.5, so let's solve for height:
3580.5 / (pi * 8.5 squared) = height
15.77 = height
So if you're trying to enter measurements for a sanke keg for any of your "vessels", use 17 inches length, 17 inches width, and 15.77 inches height for a calculated volume of 15.5 gallons. Of course, make sure to specify "circular/elliptical" for the vessel shape, which should be the default.
pi * radius squared * height
Since a sanke keg is 15.5 gallons, and one gallon is darn close to 231 cubic inches, 15.5 gallons is 3580.5 cubic inches
3.14 * 8.5 squared * height = 3580.5, so let's solve for height:
3580.5 / (pi * 8.5 squared) = height
15.77 = height
So if you're trying to enter measurements for a sanke keg for any of your "vessels", use 17 inches length, 17 inches width, and 15.77 inches height for a calculated volume of 15.5 gallons. Of course, make sure to specify "circular/elliptical" for the vessel shape, which should be the default.
 Steve973
 Light Lager
 Posts: 26
 Joined: Sun Sep 03, 2006 11:34 am
Steve973 wrote:Ok, I'll reply to myself since the calculation is pretty easy, and I'm actually a little embarrassed for not realizing it earlier. Obviously, getting the volume of a keg is basically figuring out the volume of a cylinder, which is given by
pi * radius squared * height
Since a sanke keg is 15.5 gallons, and one gallon is darn close to 231 cubic inches, 15.5 gallons is 3580.5 cubic inches
3.14 * 8.5 squared * height = 3580.5, so let's solve for height:
3580.5 / (pi * 8.5 squared) = height
15.77 = height
So if you're trying to enter measurements for a sanke keg for any of your "vessels", use 17 inches length, 17 inches width, and 15.77 inches height for a calculated volume of 15.5 gallons. Of course, make sure to specify "circular/elliptical" for the vessel shape, which should be the default.
I measured my Sanke mash tun and got the following:
15.5 L x 15.5 W x 19H
 steinbierz
 Light Lager
 Posts: 15
 Joined: Tue Oct 24, 2006 9:34 am
 Location: Springfield, VA (D.C. Metro Area)
jawbox wrote:how much does it weight
Psst, don't draw attention to the fact that I care about the dimensions of anything other than my wife!
 steinbierz
 Light Lager
 Posts: 15
 Joined: Tue Oct 24, 2006 9:34 am
 Location: Springfield, VA (D.C. Metro Area)
oh, thats too funny. I just reread what I posted. I actually did want to know what it weighed because I'm too lazy to weigh mine.
iMac 27", 3.4 GHz Intel Core i5, 8GB Ram, Mac OSX 10.12.6
iPhone 7+
iPad Pro 10.5
I like macs
iPhone 7+
iPad Pro 10.5
I like macs

jawbox  Imperial Stout
 Posts: 525
 Joined: Fri Oct 27, 2006 1:43 pm
 Location: W. Dundee
Database for equipment...
Hello Everyone,
A number of you have asked for a database of equipment. Since we are unsure of what equipment specs you would like added to BTP we will call upon you. We have started a topic specifically for equipment. Please post detailed equipment specs to the following post:
Here is a link to the equipment topic.
A number of you have asked for a database of equipment. Since we are unsure of what equipment specs you would like added to BTP we will call upon you. We have started a topic specifically for equipment. Please post detailed equipment specs to the following post:
Here is a link to the equipment topic.
Lathe
BeerTools.com Staff
BeerTools.com Staff

lathe  Double IPA
 Posts: 184
 Joined: Tue Jan 11, 2000 11:18 pm
 Location: Bethel, CT, US
7 posts
• Page 1 of 1
Return to BeerTools Pro General Topics
Who is online
Users browsing this forum: No registered users and 2 guests