Search found 22 matches
- Fri Nov 22, 2013 7:23 am
- Forum: BeerTools Pro General Topics
- Topic: Calibration query
- Replies: 2
- Views: 6279
Re: Calibration query
Got it. Thanks again for your time and support Jeff, it is greatly appreciated.
- Thu Nov 21, 2013 4:11 pm
- Forum: BeerTools Pro General Topics
- Topic: Calibration query
- Replies: 2
- Views: 6279
Calibration query
This is a question on how to do a calibration run on the MLT when the heat source is a heat exchange coil in the HLT. Assuming that the water volume in the HLT vessel is stable, and has electric heat (5500watt hot water heater coil) and the volume of water in the MLT is say 10-15 gallons in a 20 MLT...
- Fri Nov 15, 2013 5:50 pm
- Forum: BeerTools Pro General Topics
- Topic: beerxml export question
- Replies: 5
- Views: 10344
Re: beerxml export question
Jeff, Thanks I hope to start wiring this weekend and that will be one of my first tests. I may even try setting up my configuration files since I have most of the interfacing hardware, less valves already. No test runs , but maybe interface/update checks with the live Web interface check, recipe upl...
- Thu Nov 14, 2013 8:38 am
- Forum: BeerTools Pro General Topics
- Topic: beerxml export question
- Replies: 5
- Views: 10344
Re: beerxml export question
Jeff, I tried several searches last night and could not re-find the thread, sorry. In a couple of weeks I should have the control system wired up so I can do a test myself. I need to wire a 50 amp. 240 VAC circuit to my garage to power the whole unit, but my full system build out with new pots will ...
- Wed Nov 13, 2013 8:48 am
- Forum: BeerTools Pro General Topics
- Topic: beerxml export question
- Replies: 5
- Views: 10344
Re: beerxml export question
Jeff, Thanks for the time and support. I could not find the same thread at the site but the error reported was related to the conversion of the hops weight. I have attached two links below. The first is on my thread query at the BrewTroller site and the second is the only thread I could find. I will...
- Tue Nov 12, 2013 7:56 am
- Forum: BeerTools Pro General Topics
- Topic: beerxml export question
- Replies: 5
- Views: 10344
beerxml export question
Just curious if this now works well. I did a search on beerxml and saw nothing that confirms issues are fixed. My intended use is a recipe export to beerxml so I can import the recipe to my BeerTroller system I am building. Thanks, this has been my beer software of choice for quite a while and I tri...
- Fri Oct 25, 2013 9:15 am
- Forum: Equipment
- Topic: BrewTroller calibration and programming from recipe
- Replies: 0
- Views: 13058
BrewTroller calibration and programming from recipe
I decided to go down this path and hope to have my system built by March 2014. I will be using the Blichmann 20 gallon pots with electric heating in the HLT & BK. I am curious if anyone has done the system calibration runs with a similar set up (valves will be added later) and if there is an eas...
- Tue Apr 21, 2009 10:11 pm
- Forum: Equipment
- Topic: Monster Mill gap setting?
- Replies: 3
- Views: 9424
- Tue Apr 21, 2009 1:23 pm
- Forum: Equipment
- Topic: Monster Mill gap setting?
- Replies: 3
- Views: 9424
Monster Mill gap setting?
Just put on order, no arrive date yet, the MM3-2 stainless unit (2" rollers) so will have to do the bin build out & platform for my Dewalt 1/2" drill. Anyway as a generic question what gap setting do you like for your mill?
Thanks in advance.
Thanks in advance.
- Sat Mar 28, 2009 4:41 pm
- Forum: Brewing Science
- Topic: Basic water query
- Replies: 14
- Views: 38347
- Wed Mar 25, 2009 9:54 pm
- Forum: Brewing Science
- Topic: Basic water query
- Replies: 14
- Views: 38347
- Wed Mar 25, 2009 9:42 pm
- Forum: BeerTools Pro General Topics
- Topic: Elevation question on Schedule page
- Replies: 2
- Views: 5911
- Tue Mar 03, 2009 1:24 pm
- Forum: BeerTools Pro General Topics
- Topic: Elevation question on Schedule page
- Replies: 2
- Views: 5911
Elevation question on Schedule page
I am assuming that this is altitude. My question is apparently only meters can be entered as I have tried feet, f, F, ' and it would take none of these inputs (I am at 27 feet altitude).
Am I missing something?
Am I missing something?
- Sun Mar 01, 2009 6:22 pm
- Forum: BeerTools Pro General Topics
- Topic: Calibration Survey
- Replies: 4
- Views: 28346
I just spent 1 Mar. Sunday, about half a day, doing the calibration runs on all three of my vessels (all three are heated). They are heated by 165,000 btu high pressure propane burners with pressure at 15 psi. Gathering the data is not hard and I hope all goes well. I do have a question on calibrati...
- Sun Mar 01, 2009 6:11 pm
- Forum: BeerTools Pro General Topics
- Topic: Schedule confusion on my new system
- Replies: 1
- Views: 5130
Schedule confusion on my new system
Background: Home built system, old kegs, Propane 165,000 btu heaters (3), calibration runs done 1 Mar. 09 with 5 gallons, 18 degree rise in 2.5 minutes, 1/2 gas valve on Mash Tun 2.6 minutes. and Hot Liquer Tank is gravity feed for sparge (March pump to move liquids as needed) Questions: I am doing ...