• Favorite
  • Discuss
  • Subscribe
Connect
FF Single Gallon IPA

FF Single Gallon IPA

American IPA : Extract : 1 gal

Brewing4aBear

Getting into 1 gallon batches to try new hops without draining my bank account. Note: You will need to mash the 2 row and the Oatmeal together.

September 7, 2013 at 06:41pm

0.0/5.0 0 ratings

Ingredients (Extract1 gal)

  • .25 lbs Crystal 30; Great Western

    Crystal 30; Great Western

    A fully modified and saccharified two-row crystal malt roasted to a target color of 30° ASBC. A versatile malt providing moderate color and caramel flavor.

  • .25 lbs Caramel Malt 10L; Briess

    Caramel Malt 10L; Briess

    Candylike sweetness, mild caramel flavor. Characteristics & Applications: • In contrast to Brewers Malt, glassiness is a distinguishing characteristic of Caramel Malt. The glassy endosperm creates the desirable non-fermentable components giving true Caramel Malt the ability to contribute body (mouthfeel), foam, foam retention, and extended beer stability, while contributing color and unique caramel flavor. • Caramel 10L is a roasted caramel malt that imparts golden color. • Use 3-7% for Pilsener-style beers for balance. • Use 5-15% to provide color, sweetness and color to light amber beers. • Produced from AMBA/BMBRI recommended 6-Row Malting Barley varieties.

  • .25 lbs American 2-row

    American 2-row

    Yields a slightly higher extract than Six Rox brewers Malt. Tends to give a smoother, less grainy flavored beer. Some brewers claim they can detect a significant difference in flavor. Lower protein and will yield a lower color than Six-Row Brewers Malt

  • 1.125 lbs Dry Extra Light Extract

    Dry Extra Light Extract

    For making very pale ales and lagers.

  • .125 lbs Oats (Pregelatinized Flakes); Briess

    Oats (Pregelatinized Flakes); Briess

    Characteristics & Applications: • Pregelatinized Oat Flakes have been produced specifically for brewing, developing characteristics necessary for easy and efficient use in a brewhouse. The process of gelatinizing makes the starches readily soluble and digestible by the naturally occurring enzymes in barley malt. This allows the flakes to be incorporated directly into the mash with other grains. • Because flakes have a large surface area and are pre-cooked, they hydrate and disintegrate quickly. Filtration time will be normal. • There is no need to mill Oat Flakes. However, they can be put through the mill if that is the easiest means of adding them to the mash. • Oat Flakes have been dehulled before being cooked and flaked. Although the flakes are readily attacked by the malt enzymes, yield will be slightly lower than with other Pregelatinized Flakes. • Oat Flakes have a very distinctive “sticky” mouthfeel which is noticeable even when used in small amounts. • Use 5-25% of the total grist for an Oatmeal Stout. • Use a small percentage in Belgian Wit Beers.

  • .25 oz Falconer’s Flight™ Blend - 10.5 AA% pellets; boiled 45 min

    Falconer’s Flight™ Blend

    An exclusive proprietary hop blend created by Hop Union to honor and support the legacy of Glen Hay Falconer. Known to contain Citra™, Simcoe® and Sorachi Ace among other varieties. Blend imparts tropical, citrus, floral, lemon and grapefruit tones.

  • .25 oz Falconer’s Flight™ Blend - 10.5 AA% pellets; boiled 15 min

    Falconer’s Flight™ Blend

    An exclusive proprietary hop blend created by Hop Union to honor and support the legacy of Glen Hay Falconer. Known to contain Citra™, Simcoe® and Sorachi Ace among other varieties. Blend imparts tropical, citrus, floral, lemon and grapefruit tones.

  • .25 oz Falconer’s Flight™ Blend - 10.5 AA% pellets; boiled 1 min

    Falconer’s Flight™ Blend

    An exclusive proprietary hop blend created by Hop Union to honor and support the legacy of Glen Hay Falconer. Known to contain Citra™, Simcoe® and Sorachi Ace among other varieties. Blend imparts tropical, citrus, floral, lemon and grapefruit tones.

  • Fermentis US-05 Safale US-05

    Fermentis US-05 Safale US-05

    The most famous ale yeast strain found across America, now available as a ready-to-pitch dry yeast. Produces well balanced beers with low diacetyl and a very clean, crisp end palate. Sedimentation: low to medium. Final gravity: medium. Pitching instructions: Re-hydrate the dry yeast into yeast cream in a stirred vessel prior to pitching. Sprinkle the dry yeast in 10 times its own weight of sterile water or wort at 27C± 3C(80F ±6F). Once the expected weight of dry yeast is reconstituted into cream by this method (this takes about 15 to 30 minutes), maintain a gentle stirring for another 30 minutes. Then pitch the resultant cream into the fermentation vessel. Alternatively, pitch dry yeast directly in the fermentation vessel providing the temperature of the wort is above 20C(68F). Progressively sprinkle the dry yeast into the wort ensuring the yeast covers all the surface of wort available in order to avoid clumps. Leave for 30 minutes and then mix the wort e.g. using aeration.

Style (BJCP)

Category: 14 - India Pale Ale (IPA)

Subcategory: B - American IPA

Range for this Style
Original Gravity: 1.070 1.056 - 1.075
Terminal Gravity: 1.014 1.010 - 1.018
Color: 11.9 SRM 6 - 15
Alcohol: 7.3% ABV 5.50% - 7.50%
Bitterness: 69.9 IBU 40.00 - 70.00

Discussion

Post a Comment

Subscribe to this discussion.