Secondary Fermentation in a 6.5 Gal plastic bucket ???

Buying, building and using brewing equipment and apparatus. Product reviews and questions.

Moderator: slothrob

Secondary Fermentation in a 6.5 Gal plastic bucket ???

Postby Kepler57 » Thu Mar 24, 2005 12:48 am

I am new to homebreweing and i currently have three 6.5 gallon fermenters with lids and airlocks, but i have yet to acquire a carboy. Will these be as effective for secondary fermentation? Is it still worth it to do a secondary fermentation with a bucket?

~ Mike
Kepler57
Light Lager
Light Lager
 
Posts: 18
Joined: Mon Mar 21, 2005 5:47 am

Secondaries in Plastic

Postby BillyBock » Thu Mar 24, 2005 2:01 am

Long term storage in a plastic bucket could be bad for your beer. Plastic is permeable to oxygen and would eventually let it into your beer and oxidize it. Now, having said that, I use a plastic conical and all my lagers are in there roughly a month before I keg them with no oxidized defects. Also remember the main purpose of a secondary is to allow your beer some clearing time and to get it off the primary yeast cake/trub. If you bottle this will result in less sediment. I think you'll be fine...just minimize the total time it's in a plastic bucket. Now, if you were going to lager it for 6 months then I'd suggest glass or stainless steel.

Hope this helps.
v/r

Bill
BillyBock
Moderator
Moderator
 
Posts: 561
Joined: Sun Dec 31, 2000 12:37 pm
Location: Ohio

I Concur with Bill

Postby brewmeisterintng » Thu Mar 24, 2005 8:22 am

I myself am an Ale brewer as I don't have the equipment or the patients for lagers. I use the 1-2-3 rule supplemented with my hydrometer to validate fermentation being complete.
1-week in primary
2-weeks in secondary
3-weeks bottle conditioning

2 weeks in a plastic bucket should be fine.

James
User avatar
brewmeisterintng
Strong Ale
Strong Ale
 
Posts: 382
Joined: Thu Jan 13, 2005 9:47 pm
Location: Clarksville, TN

Yup I agree

Postby Azorean Brewer » Thu Mar 24, 2005 1:54 pm

When I first started brewing I didn't have carboys either, and I used plastic buckets with lids / airlocks for 2 week secondary ... My advice is GO FOR IT ... until you can afford / acquire a carboy ... you'll be better off secondarying in plastic than not at all. I agree with James and Billy.

Good Luck and welcome to the forum ...

Paul.
"I drink therefore I am"
Azorean Brewer
Strong Ale
Strong Ale
 
Posts: 326
Joined: Sun Dec 16, 2001 2:31 pm
Location: Greenville SC

Postby Dachshund12 » Mon Jan 02, 2006 3:43 pm

What about those plastic carboys that are used as water bottles for some coolers? Would it be better to use a food grade plastic bucket or one of those?
Dachshund12
 
Posts: 1
Joined: Mon Jan 02, 2006 3:41 pm

Postby BillyBock » Mon Jan 02, 2006 7:38 pm

I don't think those are the right type of plastic to handle the acidity of beer. I also believe those are more permeable than HDPE and would let oxygen in quicker.
BillyBock
Moderator
Moderator
 
Posts: 561
Joined: Sun Dec 31, 2000 12:37 pm
Location: Ohio


Return to Equipment

Who is online

Users browsing this forum: No registered users and 5 guests