Taking a mash Ph?
Moderator: slothrob
Taking a mash Ph?
How long does it take for the mash to styabilize after adding the grain so that an accurate ph reading may be taken?Also is it ok to adjust ph downward if necessary after the grain has been added or would the large amount of stirring neccesary to do this have a negative effect on the mash? What ph should my sparge water be?I will be getting a ph meter very soon and have never bothered tweaking my brewing water before and just want to be sure Im doing every thing right.Thanks in advance for your replys!
-
- Double IPA
- Posts: 170
- Joined: Fri Sep 07, 2001 1:56 am
Sparge water pH is the issue.
Blue,
If your brewing water (liquor) starts around 7.0 the mash will acidify it sufficently. The mash should pH should drop to 5.2 - 5.7.
The sparge water is what you need to be concerned with. The pH should be adjusted to the same pH as the mash or slightly lower (4.8 - 5.2). this will help from extracting the phenols and tannins from the mash should you sparge to 1.010 (or below). Now this is not a hard rule but an insurance issue. If you don't sparge too hot or as low as 1.010 and use well modified malt pH adjustment may not be required. I have worked in breweries that did not adjust for pH at all and used 'less' modified malt and made great beer. Haze problems can arise if you cross the threshhold.
Good brewing,
Tom F.
If your brewing water (liquor) starts around 7.0 the mash will acidify it sufficently. The mash should pH should drop to 5.2 - 5.7.
The sparge water is what you need to be concerned with. The pH should be adjusted to the same pH as the mash or slightly lower (4.8 - 5.2). this will help from extracting the phenols and tannins from the mash should you sparge to 1.010 (or below). Now this is not a hard rule but an insurance issue. If you don't sparge too hot or as low as 1.010 and use well modified malt pH adjustment may not be required. I have worked in breweries that did not adjust for pH at all and used 'less' modified malt and made great beer. Haze problems can arise if you cross the threshhold.
Good brewing,
Tom F.
-
- Light Lager
- Posts: 12
- Joined: Tue Jan 18, 2005 7:26 pm
- Location: Lucan, Ontario, Canada