Database for equipment...

General discussion on BeerTools Pro Software.

New 5gl Igloo mashtun

Postby jawbox » Sun Sep 14, 2008 2:19 pm

5 gal Igloo Beverage Cooler

Green & Tan Cooler, with ss mesh screen.

Igloo Heavy Duty Beverage Cooler with Ultratherm Insulation.

Shape: Circular/Elliptical
Dimensions: 10.3 in x 10.3 in x 16.9 in
Capacity: 6.0 gal
Deadspace: 0.4 gal
Heat Capacity: 4073.1 J/kg K
Heat Transfer Coefficient: 2.19 W/m2 K
PowerMac G4 933 Mhz, 1GB Ram, 17" Studio Display, Mac OSX 10.3.9
MacBook 2.16 Ghz Intel Core 2 Duo, 1GB Ram, Mac OSX 10.6.2
IMac 2.93 GHz Intel Core 2 Duo, 4GB Ram, Mac OSX 10.6.2
IPhone 5
IPad 2
I like macs ;)
User avatar
jawbox
Imperial Stout
Imperial Stout
 
Posts: 509
Joined: Fri Oct 27, 2006 1:43 pm
Location: W. Dundee

dish bottom vessel question

Postby ThomasHart » Thu Sep 25, 2008 3:38 pm

My kettles are jacketed steam kettles. They are round, but have dish/round bottoms, not flat. How would I go about adding these pieces of equipment? I understand the heat loss process, and I know the volume of each, but the equipment inner-face calculates the volume based on entered information. Does anybody have a suggestion or a fix for this?
ThomasHart
 
Posts: 3
Joined: Wed Sep 24, 2008 2:40 pm

Re: dish bottom vessel question

Postby billvelek » Fri Sep 26, 2008 1:00 am

ThomasHart wrote:My kettles are jacketed steam kettles. They are round, but have dish/round bottoms, not flat. How would I go about adding these pieces of equipment? I understand the heat loss process, and I know the volume of each, but the equipment inner-face calculates the volume based on entered information. Does anybody have a suggestion or a fix for this?

After adding the dimensions, adjust the volume to your real volume and BTP will adjust the height; while it might not 'technically' be correct, it will be your average height, and I'll bet that the rest of the information isn't going to matter anyway -- even heat capacity and transfer coefficient since you're speaking about a kettle rather than a tun. I think it should work just fine like that.

Cheers.

Bill Velek
Visit www.tinyurl.com/bvelek - portal to my brewing sites: 3,100+ members on 'Grow-Hops', and 1,350+ brewers on my 'BrewingEquip' group.
Running BTP v1.5.3 on WinXP 2005 SP3 w/AMD Athlon 64@3800+, 1GigRam, Res 1024x768
User avatar
billvelek
Imperial Stout
Imperial Stout
 
Posts: 801
Joined: Fri Mar 05, 2004 10:44 am
Location: Arkansas, USA

Some MoreBeer 1550 Specs Please?

Postby bbianchi » Tue Oct 14, 2008 11:54 pm

My 1550 is in storage and I wont be able to touch it until Jan, but id like to start working with some recipes and experimenting in the mean time.

Anyone that can provide the equipment information for the following, id appreciate it. (These are the piece parts from the 1550)

http://morebeer.com/view_product/17250//Burner_-_92000_BTU_for_Low_Pressure_Propane

http://morebeer.com/view_product/17245//Burner_-_55000_btu

Thx!
15" MBP (2,2) 2.33GHz Core 2 Duo, 2 Gig Ram, 1440x900 & 1900x1200, OS X 10.5.4
bbianchi
 
Posts: 3
Joined: Tue Feb 05, 2008 12:59 pm
Location: Selma, CA

Postby blindguardian » Tue Feb 23, 2010 5:45 pm

My equipment:

10 gal rubbermaid drink cooler

width: 12.6 in
length: 12.6 in
height: 18.5 in
capacity: 10. gal
dead space: 0.50 gal
heat capacity: 2935.8 j/kg k
heat xfer coefficient: 2.10 w/m2 k

Calibration

environment: 75 F
infusion volume: 2.88 gal
Infusion temp.: 154.1 F
temp after 5 min: 149.3 F
temp after 65 min: 142.3 F
blindguardian
Light Lager
Light Lager
 
Posts: 12
Joined: Mon Feb 22, 2010 1:36 am

Postby barleypopmaker » Sat Apr 02, 2011 6:25 pm

I don't have any calibration done, but the type of equipment I think should come with the software in a default database would be your most common equipment types. You would include 5, 7.5, 10, and 15 gallon pots as well as 15.5 gallon keggle. The most common sized mash tuns would also make sense. 5 gallon, 48 quart, and maybe one larger. The one I have is a 16.5 gallon cube cooler, but I don't think that is as common. Heat sources could be Standard Propane burner, electric stove, and gas stove. I think that would be a good start, the user still has the ability to customize and calibrate their equipment, but including the most common styles would be a good idea.
-Jason

Beta testing on an older Dell latitude c610 Laptop
Windows XP Professional SP2
Pentium III
256 RAM
barleypopmaker
Light Lager
Light Lager
 
Posts: 19
Joined: Fri Jul 01, 2005 9:28 pm

Previous

Return to BeerTools Pro General Topics

Who is online

Users browsing this forum: No registered users and 3 guests