Counter flow chiller

Buying, building and using brewing equipment and apparatus. Product reviews and questions.

Moderator: slothrob

Counter flow chiller

Postby rathskellar » Wed Feb 03, 2010 6:44 pm

The copper pipe inside the counter flow chiller taints the flavour of the chilled beer as it cools. Tastes like copper. I m assuming it is corroded. How do I clean or shall I start again with fresh tube and how do I check this when purchasing copper tube.
rathskellar
 
Posts: 2
Joined: Wed Feb 03, 2010 6:36 pm

Postby Grizz » Thu Feb 04, 2010 12:05 am

Fill it with PBW and let it soak for a while. Drain and refill. If the PBW water keeps coming out with a tint of green keep doing it. The only other thing that could help was if you could run some kind of brush through the chiller to aid in cleaning.
Beer is to Men as Water is to Fish!
User avatar
Grizz
Light Lager
Light Lager
 
Posts: 30
Joined: Tue Apr 08, 2008 9:55 am
Location: Las Vegas

Postby beernut » Thu Feb 18, 2010 4:22 pm

Like Grizz I run PBW through the CFC and let it soak for an hour or so after each brew then flush out with hot water. At the start of chilling after the boil I run a litre of hot wort through the chiller before turning the water on, the theory being is to kill off any nasties and clean out any copper residue. Works for me[/img]
beernut
 
Posts: 7
Joined: Tue Jan 22, 2008 4:36 am
Location: South Channel Tasmania

Postby homercules » Wed Mar 17, 2010 12:58 pm

I have been using a home made cfc for about 4 years total, with a six year period of neglect in the middle. After several failed attempts to clean the inside of the copper tube, I ended up pushing a slurry of pbw solution, and 0.5 mm glass beads through it with about 10 psi of CO2. After a few passes, the inside of the tube looked like a mirror, then just a soak in starsan to passivate the copper, and back in action.

I can't deny that it was a bit of a hassle, but It took less time and money than making a new one.

hope this helps.
homercules
 
Posts: 3
Joined: Mon Mar 15, 2010 10:04 pm


Return to Equipment

Who is online

Users browsing this forum: No registered users and 1 guest

cron