Hi,
I started a Scottish Ale on the 19th, in the excitment I forgot to really oxygenate it, I thought about it only 24 hours later
Anyway, after about 12 hours the fermentation started, the OG was 1.050 and the pitching temp was 24C. My yeast was a Wyeast Activator Scotch Ale pack. My current temp is 20.5C. And the current gravity is 1.038.
Do you think it's really too slow? Should I do something? Rack for giving oxygen to the yeast? Is it fine as is?
Thank you for any advice,
J.
Super slow fermentation
Moderator: slothrob
slow fermentation?
I don't think it's a particularly slow fermentation.
You pitched on the 19th, it didn't start until the 20th, and it's only the 23rd. I assume it's still fermenting...
The best thing to do at this point is probably to let it go. It's kind of late to add oxygen and racking it off the yeast is the last thing you want to do. I think it will be best to leave it alone, allow it to finish fermenting, then give it a few more days to clean up any fermentation byproducts that might have been made due to the stressed fermentation.
A week isn't an unusual amount of time for a fermentation to completely finish. Two weeks isn't a bad amount of time to let it sit before racking.
You pitched on the 19th, it didn't start until the 20th, and it's only the 23rd. I assume it's still fermenting...
The best thing to do at this point is probably to let it go. It's kind of late to add oxygen and racking it off the yeast is the last thing you want to do. I think it will be best to leave it alone, allow it to finish fermenting, then give it a few more days to clean up any fermentation byproducts that might have been made due to the stressed fermentation.
A week isn't an unusual amount of time for a fermentation to completely finish. Two weeks isn't a bad amount of time to let it sit before racking.
BTP v2.0.* Windows XP
slow ferment
I don't think there should be any problem with that.jmorignot wrote:And do you think I will have enough active yeast for the carbonation?
You need to age more on the terms of months and usually at low temperatures and with very clean transfers before not having enough yeast is a concern. It may take a week or so longer to fully carbonate, but you'll have the payoff of having less yeast on the bottom of the bottle.
Still, try and remember to aerate next time.
BTP v2.0.* Windows XP
slow ferment
It sounds like it might be time to try adding more yeast. You could probably add US-05 without altering the flavor profile much. It's a pretty aggressive fermenter, so if there are some edible sugars around it should eat them.
I've never had a stuck fermentation myself, but I've read that it can be difficult to get the added yeast to ferment a partially fermented beer. What some say helps, is making a small starter to get the yeast going, then adding the yeast once it begins actively fermenting, which should only take a few hours. While it is active, it's more apt to keep fermenting in the beer. It's a variation on Kreusening.
Normally, I wouldn't recommend a starter for dry yeast, but this might be an exception.
I've never had a stuck fermentation myself, but I've read that it can be difficult to get the added yeast to ferment a partially fermented beer. What some say helps, is making a small starter to get the yeast going, then adding the yeast once it begins actively fermenting, which should only take a few hours. While it is active, it's more apt to keep fermenting in the beer. It's a variation on Kreusening.
Normally, I wouldn't recommend a starter for dry yeast, but this might be an exception.
BTP v2.0.* Windows XP
stuck fermentation
It certainly seems like a stuck fermentation.
I wouldn't toss it, yet. I'd try pitching a pack of US-05 dry yeast.
I wouldn't toss it, yet. I'd try pitching a pack of US-05 dry yeast.
BTP v2.0.* Windows XP
-
- Posts: 2
- Joined: Wed Feb 13, 2008 7:05 pm