Just noticed this on a belgian Tripel recipe. When I added the 2.5lbs of Table Sugar, the pre-boil gravity changed.
I like to use the pre-boil gravity to let me know what I need to collect out of my mash.
Adjuncts in boil kettle shouldn't affect pre-boil gravity
- billvelek
- Imperial Stout
- Posts: 801
- Joined: Fri Mar 05, 2004 9:44 am
- Location: Arkansas, USA
- Contact:
You can uncheck the ingredient and then check gravity
I thought maybe there was a "stage" that you could set to eliminate that problem, but I see that there isn't, which seems strange to have appropriate menu items that are dimmed out. E.g., most brewers don't boil their honey -- at least not for the full length -- but it isn't possible to select "Primary Fermenter".
Cheers.
Bill Velek
Cheers.
Bill Velek
Visit www.tinyurl.com/bvelek - portal to my brewing sites: 3,100+ members on 'Grow-Hops', and 1,350+ brewers on my 'BrewingEquip' group.
Running BTP v1.5.3 on WinXP 2005 SP3 w/AMD Athlon 64@3800+, 1GigRam, Res 1024x768
Running BTP v1.5.3 on WinXP 2005 SP3 w/AMD Athlon 64@3800+, 1GigRam, Res 1024x768
Re: Adjuncts in boil kettle shouldn't affect pre-boil gravit
Version 1.5.3 addresses this issue by adding a new stage for extracts and adjuncts called "Late Addition (Kettle)". Anything marked as a late addition will not be calculated as part of the pre-boil and will not affect hop utilization calculations. Hope this helps.Otter wrote:Just noticed this on a belgian Tripel recipe. When I added the 2.5lbs of Table Sugar, the pre-boil gravity changed.
I like to use the pre-boil gravity to let me know what I need to collect out of my mash.
Jeff
BeerTools.com Staff
BeerTools.com Staff
BeerTools Pro does not predict apparent attenuation. Rather it is entered by the user and left unmodified by BTP when calculating recipe results. The only time BeerTools Pro alters the apparent attenuation is when the user enters a different terminal gravity than what is predicted. Experienced brewers will typically adjust apparent attenuation during the recipe formulation process to account for different yeast strains and varying proportions of highly fermentable adjuncts. Hope this helps clear things up.jawbox wrote:Jeff,
Could you address how BTP handles adjuncts (sugar, honey etc) that usually ferment out 100%. I think BTP applies the yeast attenuation to these items rather than fermenting them out at 100%.
Thanks.
Jeff
BeerTools.com Staff
BeerTools.com Staff
Actually, BTP uses the "as-is coarse grind" to calculate gravity. This value is the coarse grind adjusted for moisture content. Additionally, the AICG depends on DBFG and FG-CG so changing any of these values will affect the others.jawbox wrote:One more question.
Does BTP use the Fine grind or Coarse grind in calculating the gravity contribution from each malt?
Thanks Again
Jeff
BeerTools.com Staff
BeerTools.com Staff