How much sugar to carbonate (forgot to measure gravity)

What went wrong? Was this supposed to happen? Should I throw it out? What do I do now?

Moderator: slothrob

How much sugar to carbonate (forgot to measure gravity)

Postby Dooder » Fri Mar 13, 2009 12:14 pm

I made a brew

Recipe:
6lbs Dry malt extract Wheat
.25 lbs Munich grain
1oz Tettnanger hops
Safbrew WB-06 yeast

Fermented in 5 gal. carboy

It's been 16 years since I brewed and I forgot to geat a gravity measurement before I pitched the yeast (I think I was too excited about getting it started).

A day or tow later I realized my mistake and need some help from experienced brewers on what amount of corn sugar you might recommend to finsh for carbonation.
Dooder
 
Posts: 2
Joined: Fri Mar 13, 2009 11:58 am

carbonation

Postby Suthrncomfrt1884 » Fri Mar 13, 2009 2:53 pm

I usually put around 3-4 ounces of corn sugar into each batch. It all depends on how much carbonation you'd want though. Being a wheat beer, you will probably want a good amount of carbonation.

Not knowing the temp and alcohol content, I would probably put around 3/4cup of corn sugar into 2 cups water. Boil and add to bottling bucket.

That's a safe amount to add. You won't have any bottle bombs, and it won't be over carbonated.

Check out this link if you want to get more exact with your additions....
http://www.howtobrew.com/section1/chapter11-4.html
Primary - Belgian Dubbel, Belgian IPA
Secondary - Cherry Lambic
Bottled - Bourbon Barrel Coffee Porter, Double Chocolate Raspberry Stout, Imperial Nut Brown, Apfelwein, American Amber Ale w/Homegrown Hops, Breakfast Stout
Kegged - Bass Clone, ESB
User avatar
Suthrncomfrt1884
Double IPA
Double IPA
 
Posts: 223
Joined: Sat Oct 25, 2008 11:39 pm
Location: Rockford, Illinois

Postby bfabre » Fri Mar 13, 2009 10:07 pm

I would probably put around 3/4cup of corn sugar into 2 cups water.

3/4 cup is about the standard. I have never had any problem with that measurement. If you go to 1 cup you will end up with over carbonation or "bottle bombs".
"B"
User avatar
bfabre
Double IPA
Double IPA
 
Posts: 139
Joined: Wed Nov 21, 2007 11:05 pm
Location: Tenino, WA

Postby cozrulz » Sun Mar 15, 2009 4:07 pm

I think 1 ounce of corn sugar, per 1 gallon of beer.

Although, usually I go a little below that. 3/4 of a cup would probably be alright. Then if it is a little undercarbonated you can adjust accordingly on future batches.

Mix the corn sugar with 2 cups of water, and make sure to lightly stir (no splashing) when transferring the beer to the bottling bucket. This will help mix the solution evenly and carbonate the beers evenly.
User avatar
cozrulz
Pale Ale
Pale Ale
 
Posts: 56
Joined: Mon Jan 29, 2007 2:38 pm

Replies to my question Re: forgot to measure gravity...

Postby Dooder » Mon Mar 16, 2009 9:45 pm

Thank all who replied. I think its all coming back. I think the 3/4 cup is the most I'll use, just to avoid any problems. Next time I'll measure.

Thanks!!!
Dooder
 
Posts: 2
Joined: Fri Mar 13, 2009 11:58 am


Return to Brewing Problems, Emergencies, Help!

Who is online

Users browsing this forum: Yahoo [Bot] and 1 guest

cron