kettle evaporation rate

Buying, building and using brewing equipment and apparatus. Product reviews and questions.

Moderator: slothrob

kettle evaporation rate

Postby steven0356 » Tue Jan 20, 2009 7:33 pm

just out of curiosity what kettle evaporation rate per hour do you use?

Thanks

Steve
steven0356
 
Posts: 3
Joined: Tue Jan 20, 2009 7:27 pm
Location: Atlanta

re:kettle evaporation rate

Postby Legman » Tue Jan 20, 2009 8:07 pm

I use 1 gallon per hour. And that may not be totally accurate. But that's what seems to be the closest I can come up with.
I also think it's a bit dependent on your system.
User avatar
Legman
Strong Ale
Strong Ale
 
Posts: 349
Joined: Sat Dec 08, 2007 9:02 pm
Location: North Carolina

Postby steven0356 » Tue Jan 20, 2009 8:13 pm

That's probably about right. that comes in right around 8% I will start with that and go from there

Thanks
steven0356
 
Posts: 3
Joined: Tue Jan 20, 2009 7:27 pm
Location: Atlanta

evaporation

Postby slothrob » Tue Jan 20, 2009 8:13 pm

I lose 1 gallon an hour from my 5 gallon pot on the electric stove when I do 3 gallon batches.

I lose 1.25 gallons an hour from my 8 gallon pot on a propane burner outside when I brew 5 gallon batches. I lost 1.5 gallons an hour the first couple times I used that system, until I learned to control the burner a bit better.
BTP v2.0.* Windows XP
User avatar
slothrob
Moderator
Moderator
 
Posts: 1768
Joined: Mon Apr 10, 2006 1:36 pm
Location: Greater Boston

Postby mmayer » Sat Jan 24, 2009 4:56 pm

I use a Sanke keg for my boil kettle and run at about 15% per hour boil off rate.
mmayer
 
Posts: 6
Joined: Sat Jan 24, 2009 4:53 pm
Location: Cleveland, OH

RE: evaporation

Postby wottaguy » Sun Jan 25, 2009 1:02 pm

Well, my normal rate has been 1 gallon/hour. There was one day last summer that was awful humid and it seemed to take forever to get the boil down to the correct volume. On the other hand....during the drier and less humid days, the evaporation rate seems to be slightly higher. But my average is 1 gallon/hr and that's what I use.

(_)3
Visit my blog @ http://www.wottashomebrewblog.blogspot.com

On Tap:
HL Pale Ale
HL Lite Lager
Bottled:
HL Simcoe Pale Ale
HL Wizeguy Weizenbock
HL Reveur Saison
HL Dry Stout
HL Kentucky Common
User avatar
wottaguy
Moderator
Moderator
 
Posts: 361
Joined: Thu Aug 11, 2005 10:00 am
Location: Florida

Postby ColoradoBrewer » Mon Jan 26, 2009 11:24 am

Here's a link to a site that has various calculators for homebrewers. Just scroll down the page to the calculators section. I've used the boil off calculator and it's spot on. The author (johnplctech) is an engineer that used to be pretty active on a few of the forums, but I haven't seen anything he's posted in quite a while.
BTP 2.0.8 (Linux)
User avatar
ColoradoBrewer
Strong Ale
Strong Ale
 
Posts: 264
Joined: Tue Oct 24, 2006 11:32 am
Location: South of Denver, North of the Springs


Return to Equipment

Who is online

Users browsing this forum: No registered users and 3 guests

cron