Starter Equipment Kits
Moderator: slothrob
- keeblerman1214
- Posts: 3
- Joined: Tue Aug 12, 2008 8:31 pm
- Location: Florida
Starter Equipment Kits
Is it necessary for a first time brewer to get a starter kit w/ glass carboys instead of the basic kit w/ the 'ale pales'? Does the glass make any difference in the beer quality?
glass carboy's
All I have is glass. I have been told that plastic is good too but, and the is always a but. Plastic is porous and can retain the flavors of past brews. Not to mention it can discolor.
"B"
- billvelek
- Imperial Stout
- Posts: 801
- Joined: Fri Mar 05, 2004 9:44 am
- Location: Arkansas, USA
- Contact:
Try plastic buckets
I've heard that there was only one manufacturer of glass carboys supplying the U.S. -- from somewhere in Mexico -- and that they are no longer in business; I have no idea how much of that is true or what impact it will have. I've heard rumors that glass carboys are rising in price as a result. Consequently, folks are looking for alternatives, with the side benefit that they are safer.
Just a suggestion, but especially if you are just starting out and are perhaps not completely sure that you will continue with homebrewing, I'd suggest trying plastic buckets for a few brews, and then compare prices between the plastic carboys and glass carboys and consider whether it would be worth paying a bit more for the plastic. They have the advantage of having a valve on the side to make racking easier.
As for all the concerns about scratches in the plastic harboring bacteria, I haven't had problems for what I use my buckets for -- to transfer wort. If I were going to ferment inside them, though, I would probably fill them with boiling water and let them soak that way for about 15 minutes. Surely between that and some chemical sanitizer, they should be completely safe.
Cheers.
Bill Velek
Just a suggestion, but especially if you are just starting out and are perhaps not completely sure that you will continue with homebrewing, I'd suggest trying plastic buckets for a few brews, and then compare prices between the plastic carboys and glass carboys and consider whether it would be worth paying a bit more for the plastic. They have the advantage of having a valve on the side to make racking easier.
As for all the concerns about scratches in the plastic harboring bacteria, I haven't had problems for what I use my buckets for -- to transfer wort. If I were going to ferment inside them, though, I would probably fill them with boiling water and let them soak that way for about 15 minutes. Surely between that and some chemical sanitizer, they should be completely safe.
Cheers.
Bill Velek
Visit www.tinyurl.com/bvelek - portal to my brewing sites: 3,100+ members on 'Grow-Hops', and 1,350+ brewers on my 'BrewingEquip' group.
Running BTP v1.5.3 on WinXP 2005 SP3 w/AMD Athlon 64@3800+, 1GigRam, Res 1024x768
Running BTP v1.5.3 on WinXP 2005 SP3 w/AMD Athlon 64@3800+, 1GigRam, Res 1024x768
Re: Starter Equipment Kits
Ahhhhhhhh, the age old question, plastic bucket or glass carboy?:roll:keeblerman1214 wrote:Is it necessary for a first time brewer to get a starter kit w/ glass carboys instead of the basic kit w/ the 'ale pales'? Does the glass make any difference in the beer quality?
There's really nothing wrong with either one. It is mainly a personal preference with pros and cons for both. But the main thing is that they both will do the same job. You will not notice any difference in you brews from one fermenter to the other.
I have used both glass carboys and plastic buckets. I prefer the plastic bucket. They're cheap to buy and/or replace, light weight and easier to clean. I also don't buy the plastic harboring bacteria story. I've never heard of anyone actually having that problem. But you always hear folks bring that up, probably just because they were told that by someone else. And why would it get scratched??? You shouldn't be cleaning any of your brewing equipment with anything abrasive at all!
Glass carboys can be expensive and a little harder to clean. They can also be dangerous. They are much heavier than plastic and can easily slip from you hands and send glass flying everywhere. But handled properly, they can be just fine.....and you get to see what's going on inside while the yeast works it's magic.
If I were you, I would start with the plastic bucket. It's cheap and it'll get you started brewing. Later on, spend a little money on a glass carboy and give it a try. That's just my 2 cents.
- keeblerman1214
- Posts: 3
- Joined: Tue Aug 12, 2008 8:31 pm
- Location: Florida
-
- Light Lager
- Posts: 14
- Joined: Tue Aug 26, 2008 3:07 pm
Starter Kits/plastic buckets, versus glass carboys
I agree with comments.
I learned to brew with a friend who had the carboys, so I emulated his set up. I have heard horror stories about breakage. I bought the expensive handles too since I have to schlep my brews to the basement.
I still wanted a couple ale pales for racking, bottling, sanitizer baths, and to recieve grain from my maltmill.
I got a true brew kit for like $60 that had most of what I needed. I also bought the JET carboy and bottle washer-good $10 spent.
The Floating thermometer and a proper hydrometer flask.
I also think reusable nylon bags are good too.
The carboy pros are:
Transparent to see progress-although you have to keep them dark-duh...
supposedly better sealed system
Otherwise the buckets do everything else.
I have made 4 batches so far. 1 grand slam, 1 that was fouled by sanitizer being sucked into the carboy by the blow off, 1 aging for tasting this weekend, and 1 in primary.
I was in a brew shop last week and the guy was saying that the mexican carboy co is gone and the new ones are french with that waffle dimple patter and more $$$. Hopefully, I don't need any more.
I learned to brew with a friend who had the carboys, so I emulated his set up. I have heard horror stories about breakage. I bought the expensive handles too since I have to schlep my brews to the basement.
I still wanted a couple ale pales for racking, bottling, sanitizer baths, and to recieve grain from my maltmill.
I got a true brew kit for like $60 that had most of what I needed. I also bought the JET carboy and bottle washer-good $10 spent.
The Floating thermometer and a proper hydrometer flask.
I also think reusable nylon bags are good too.
The carboy pros are:
Transparent to see progress-although you have to keep them dark-duh...
supposedly better sealed system
Otherwise the buckets do everything else.
I have made 4 batches so far. 1 grand slam, 1 that was fouled by sanitizer being sucked into the carboy by the blow off, 1 aging for tasting this weekend, and 1 in primary.
I was in a brew shop last week and the guy was saying that the mexican carboy co is gone and the new ones are french with that waffle dimple patter and more $$$. Hopefully, I don't need any more.
Re: Starter Equipment Kits
I fully agree w/ Legman.I have thought long and hard about going to glass but w/ a bad back and the broken carboy horror stories I have stuck w/ plastic buckets.I looked into the plastic conical fermenters and the manufacturer says that scratches harboring bugs is mostly a myth. They reccomend 1. Do nothing about scratches in plastic. 2. use a blade and file the scratch down.And pour 180F water down the sides of the fermenter to sanitize it.Makes me feel a little safer to use my plastic buckets.Oh yeah, I store my buckets full of bleach water and it takes care of any stains or odors before my next batch.Legman wrote:Ahhhhhhhh, the age old question, plastic bucket or glass carboy?:roll:keeblerman1214 wrote:Is it necessary for a first time brewer to get a starter kit w/ glass carboys instead of the basic kit w/ the 'ale pales'? Does the glass make any difference in the beer quality?
There's really nothing wrong with either one. It is mainly a personal preference with pros and cons for both. But the main thing is that they both will do the same job. You will not notice any difference in you brews from one fermenter to the other.
I have used both glass carboys and plastic buckets. I prefer the plastic bucket. They're cheap to buy and/or replace, light weight and easier to clean. I also don't buy the plastic harboring bacteria story. I've never heard of anyone actually having that problem. But you always hear folks bring that up, probably just because they were told that by someone else. And why would it get scratched??? You shouldn't be cleaning any of your brewing equipment with anything abrasive at all!
Glass carboys can be expensive and a little harder to clean. They can also be dangerous. They are much heavier than plastic and can easily slip from you hands and send glass flying everywhere. But handled properly, they can be just fine.....and you get to see what's going on inside while the yeast works it's magic.
If I were you, I would start with the plastic bucket. It's cheap and it'll get you started brewing.
-
- Posts: 3
- Joined: Mon Nov 17, 2008 1:26 pm
try them out
I have used glass, better bottles, and the bucket and I haven't had any differences in the quality of the beer. I do prefer the bucket, because it is much easier to use and a lot easier to clean. I plan on making a SS conical pretty soon and I think that is going to be the best
I found some really cheap very old arrowhead 5 gal glass carboys at thrift store for under $10 and that is cheaper then what I paid for my better bottle and my bucket shipped. If you are serious about brewing I would give them all a try and see which one you like better.
I found some really cheap very old arrowhead 5 gal glass carboys at thrift store for under $10 and that is cheaper then what I paid for my better bottle and my bucket shipped. If you are serious about brewing I would give them all a try and see which one you like better.