10 gallon bev cooler
Moderator: slothrob
- johnnynothumb
- Light Lager
- Posts: 18
- Joined: Sun Dec 02, 2007 7:37 pm
- Location: Pinole, ca
10 gallon bev cooler
does any know what is the max grain bill for a 10 gallon beverage cooler I am thinking about a large imperial IPA at around 35#s of grain with a 12 gallon boil and not sure if I am attempting to large of a grain bill
Grain Bill
Even at around 1.1 quarts per pound of grain, you would end up at around 12 gallons of mash with a 35lbs grain bill. I think the max you can do in a 10 gallon cooler would be closer to 28lbs. Good luck.
RE: 10 gallon bev cooler
Well you can always brew a 5 gallon batch of the stuff and have enough room in your 10 gallon to do it with!
(_)3
(_)3
Visit my blog @ http://www.wottashomebrewblog.blogspot.com
On Tap:
HL Pale Ale
HL Lite Lager
Bottled:
HL Simcoe Pale Ale
HL Wizeguy Weizenbock
HL Reveur Saison
HL Dry Stout
HL Kentucky Common
On Tap:
HL Pale Ale
HL Lite Lager
Bottled:
HL Simcoe Pale Ale
HL Wizeguy Weizenbock
HL Reveur Saison
HL Dry Stout
HL Kentucky Common
Extract
You could also add some extract to the boil to make up for the grain that you couldn't add to the Mash.