Sorry
I know this has been asked before.... but I could not find the thread.
I've got a Recipe with a Mash Effieciency of 324.7 %
I'm not sure what I didi to get there?????
Or how to get it Back to a Real Number
Heck if I could get that kinda efficiency I'd be making good money !
Thanks
Steve
iBook G4 10.39 BTO 1.19
324 % Efficiency Question ?
324 % Efficiency Question ?
Nope - none that I can find.....
I'm making a IPA clone, Extract 6lbs
1lb of steeping grain
my hops are 4 oz total... but
5 gallon batch
All units are uniform - OZ for Hops LBS for Extract, Gallons for Water....?
?
Steve
I'm making a IPA clone, Extract 6lbs
1lb of steeping grain
my hops are 4 oz total... but
5 gallon batch
All units are uniform - OZ for Hops LBS for Extract, Gallons for Water....?
?
Steve
324 % Efficiency Question ?
Actually if I put in the 75% efficancy
BTP adds 3.3 Lbs of grain to my steeping grain for a total of 4.3 lbs
This has something to do with the efficiency of Extract doesn't it
??????????????
Steve
BTP adds 3.3 Lbs of grain to my steeping grain for a total of 4.3 lbs
This has something to do with the efficiency of Extract doesn't it
??????????????
Steve
324 % Efficiency Question ?
I just put all the SAME ingredients in the same amount
into another Recipe
and locked the efficency at 75% and everything looks good....?
????
Steve
into another Recipe
and locked the efficency at 75% and everything looks good....?
????
Steve
324 % Efficiency Question ?
I can't replicate the error.
One of recipes just turned up this way.
I re-did the recipe again and got normal numbers....?
Steve
One of recipes just turned up this way.
I re-did the recipe again and got normal numbers....?
Steve
- billvelek
- Imperial Stout
- Posts: 801
- Joined: Fri Mar 05, 2004 9:44 am
- Location: Arkansas, USA
- Contact:
Re: 324 % Efficiency Question ?
Hi, Steve. I don't use extracts, but from playing about with BTP a bit, I'm pretty sure that efficiency settings do not apply to extracts. I just tried an experiment, and the OG was completely unaffected by whether I had efficiency set at 50% or 100%. That makes sense, when you think about it, because 'efficiency' is the amount of sugar you are extracting from your mash, which is completely inapplicable to extracts. Now, I reported a bug sometime back regarding how BTP is handling steeping of specialty grains, but I don't think that has been addressed yet.stevie.o wrote:Actually if I put in the 75% efficancy
BTP adds 3.3 Lbs of grain to my steeping grain for a total of 4.3 lbs
This has something to do with the efficiency of Extract doesn't it
??????????????
Steve
Cheers.
Bill Velek
Visit www.tinyurl.com/bvelek - portal to my brewing sites: 3,100+ members on 'Grow-Hops', and 1,350+ brewers on my 'BrewingEquip' group.
Running BTP v1.5.3 on WinXP 2005 SP3 w/AMD Athlon 64@3800+, 1GigRam, Res 1024x768
Running BTP v1.5.3 on WinXP 2005 SP3 w/AMD Athlon 64@3800+, 1GigRam, Res 1024x768
I'm not a BTP user (STILL waiting for a demo..) and as such I don't know how the efficiency is handled, BUT there is Mash efficiency and there is Total System Efficiency. MASH efficiency will not apply to extracts as Bill said, but total system efficiency also takes into account the water losses from kettle and mash tun dead space, boil off, water absorption by hops and trub etc., which would apply to extract as well as all other types of brewing.
Again, I don't know hot BTP handles this, and I certainly don't know if it applies to this particular problem, just adding my 2 cents.
Rob
Again, I don't know hot BTP handles this, and I certainly don't know if it applies to this particular problem, just adding my 2 cents.
Rob