Painted bottles

General brewing information, questions and discussion. Topics that do not seem to fit elsewhere.

Moderators: slothrob, 2row, wottaguy

Painted bottles

Postby fitz » Thu May 01, 2003 6:35 am

Has anyone painted a label or painted over a label on their beer bottles? If so, what type of paint did you use if it worked. I would like to make some permanent pub labels for my bottled brew.
fitz
Strong Ale
Strong Ale
 
Posts: 442
Joined: Thu Dec 19, 2002 9:36 am

Enamel

Postby Stretch » Fri May 02, 2003 9:01 pm

I have no direct experience with painting bottle labels, but as an artist I have much experience with both paint and glass. If you want to use a paint directly on the bottles that will stand up to hand washing and refridgeration, there are special enamels available at your craft store or stained glass supplier that can be baked on in your oven. If you have blank labels or printed labels that you've primed (preferably with "gesso"), most any paint should be fine, especially if covered with a clear, glossy sealer, but I would still recommend an enamel. Waterbase enamels (acrylic or latex)are fairly inexpensive, easily cleaned, and relatively durable. You may encounter problems with any waterbase paint sticking to printed labels. If so, you might try lightly sanding with a very fine git paper first. Good luck!
Stretch
 
Posts: 7
Joined: Mon Jan 21, 2002 12:07 am


Return to General

Who is online

Users browsing this forum: No registered users and 1 guest

cron