Making Labels using Ink Jet

General brewing information, questions and discussion. Topics that do not seem to fit elsewhere.

Moderators: slothrob, 2row, wottaguy

Making Labels using Ink Jet

Postby Willbrew » Wed Jan 16, 2002 7:57 pm

I read this a little while ago and wondered what exactly I could use to keep the ink from running. And ideas?

"You might want to spray or brush some kind of water resistant finish on them to keep the ink from running."
Willbrew
 
Posts: 3
Joined: Mon Jul 16, 2001 3:11 am

Hobby & Craft Sealers

Postby BillyBock » Thu Jan 17, 2002 1:51 am

I recently went through this on the Holiday beers I made. I went down to the hobby/craft section in Walmart and bought some all-purpose sealer from Delta Ceramcoat. I would've used the spray version of the sealer; however, it's too cold outside for it to dry adequately. If you use the brush on stuff, don't let the brush get dry because it'll smear some of the ink--keep plenty of sealer on it at all times. It took some practice but I got the hang of it. Use a wide brush, get a glob of sealer on there, spread it around, let it dry, and you're in business. Good luck.
BillyBock
Moderator
Moderator
 
Posts: 561
Joined: Sun Dec 31, 2000 12:37 pm
Location: Ohio


Return to General

Who is online

Users browsing this forum: Bing [Bot] and 1 guest