Red color

Grains, malts, hops, yeast, water and other ingredients used to brew. Recipe reviews and suggestions.

Moderator: slothrob

Red color

Postby zeno » Mon Jan 27, 2003 11:04 am

Yes, I know that "Red" is not concidered by most beer scholors to be a beer type, but red beers have become popular enough to where 3 out of 5 of my friends want that to be my next beer..

As such.. What should I use to get that nice red color in there? As is no suprise, the recipe generater appears no not have "Red Ale" as a style, so I'm pretty much in the dark as to what I should use..
zeno
Pale Ale
Pale Ale
 
Posts: 56
Joined: Fri Jan 24, 2003 11:44 am
Location: Cary, NC, US

in the dark?

Postby Gravity Thrills » Mon Jan 27, 2003 11:32 am

It might not be so bad to be "in the dark" here. Just a touch of black patent (maybe 1 ounce)on top of a normal amount of crystal malt for a Brit bitter will give a nice red hue. Or, you could so away with the crystal altogether and use Wyermann's melanonoidin (red) malt in its place. An extended vigorous wort boil also helps bring out the red hues since you are carmelizing a portion of the wort sugar.

Importantly, make sure to tone your hops down from Brit bitter to get an authentic Irish-style red with more malt emphasis. Like Scottish ales, the Irish ales were likely hopped less than Emglish counterparts because hops were not locally grown and were therefore too expensive to use in excess.

There are several posters here who claim Irish red as their flagship brew, so I'm sure you will get a few people chiming in on this one :-)

Cheers,
Jim
Gravity Thrills
Strong Ale
Strong Ale
 
Posts: 285
Joined: Thu Oct 25, 2001 9:12 pm

Mine is Kinda Dark

Postby dartedplus » Mon Jan 27, 2003 2:11 pm

I just bottled my red on Saturday, I used 2 oz each of choc and black pat malt. Upon tasting it, next time I think I will go with just the choc malt, as the black pat has left that dark burnt flavor in there. Also, mine came out pretty dark, so even before tasting it was wrote in my notes to only use 1 1/2 oz of each next time. If you can find it, carafa III is a very dark malt, that comes dehusked, so you get the dark tones from it without getting the burnt flavor. I wanted to use it, but didnt come across it until after I had placed my grain order. I think it would be good to have on hand though to get the darkness without the bad flavor, so I will probably order some next time around. Now I just have to wait.....another 12 days or so. Then my red will be getting around...

Ed
dartedplus
Strong Ale
Strong Ale
 
Posts: 341
Joined: Sat Mar 17, 2001 11:33 pm
Location: Hummelstown, PA, US

Try this

Postby Save The Ales » Tue Jan 28, 2003 6:03 pm

If you can locate a copy of "Homebrew Favorites" by Lutzen & Stevens there is a recipe for Irish Red Ale on page 35. Although the book was published in 1994 both HBS's that I use have it in stock.

If you can't locate a copy then e-mail me at: pauljconley@aol.com and I'll send the recipe.

Regards,

Paul
A bad homebrew is better than anything store bought
Save The Ales
 
Posts: 9
Joined: Mon Sep 24, 2001 2:41 pm
Location: North Attleborough, MA, US

red = amber malt

Postby belladonna » Sun Feb 09, 2003 7:36 am

I believe 'red' comes from amber malt syrup. Today I plan to brew "Outback Red Australian Ale" from a beertools recipe submitted 3/11/2002 from unknown society of brewers.
belladonna
 
Posts: 2
Joined: Tue Oct 29, 2002 8:00 pm


Return to Ingredients, Kits & Recipes

Who is online

Users browsing this forum: No registered users and 1 guest

cron