I picked up a couple of kegs at an estate sale recently, $10 for the pair, and they are in excellent condition! I have 2 batches of brew fermenting as we speak, a lager and an ale (which should be ready before the lager). My question is this:
Can I naturally carbonate in the keg for 2-3 weeks, pick up a pin lock connector along with a picnic tap and get the same results?
Also, using the same pin lock and picnic tap setup, would I be able to sanitze the pick up tube inside the keg and drain through the picnic tap without Co2?
Just a temporary situation until I can pick up a Co2 tank and regulator.....
First time Kegger, but low on budget...
Moderator: slothrob
-
- Light Lager
- Posts: 21
- Joined: Wed Apr 05, 2006 9:13 am
- Location: Texas
Also, I've heard of people using kegs without CO2, by tilting them on their side and allowing them to gravity feed after carbonating with sugar. This can be used to deliver cask conditioned beer, but the beer will quickly spoil (a few days or so) due to the oxygen that will be drawn in to replace the removed beer.
You won't be able to deliver beer with the keg vertical without a pressure source, CO2 being your best option. You can get these handheld CO2 chargers that will add CO2 for around $20, if you don't want to get a tank, yet. You'll need an appropriate pin-lock connector, as well.
You won't be able to deliver beer with the keg vertical without a pressure source, CO2 being your best option. You can get these handheld CO2 chargers that will add CO2 for around $20, if you don't want to get a tank, yet. You'll need an appropriate pin-lock connector, as well.
BTP v2.0.* Windows XP
-
- Pale Ale
- Posts: 79
- Joined: Wed Oct 25, 2006 12:06 pm
- Location: La Fayette, NY, USA
- Contact:
-
- Light Lager
- Posts: 21
- Joined: Wed Apr 05, 2006 9:13 am
- Location: Texas
problem solved....
Looks like I am in business! A friend of ours brought by a couple of used oxygen tanks, and the oxygen supply place said I could just bring them in and exchange them for co2 tanks, so I just need to get the connectors and line..Thanks for all the advice!