Mash-tun dead space figured in

General discussion on BeerTools Pro Software.

Mash-tun dead space figured in

Postby bruerik » Sun Jul 22, 2007 9:40 pm

How do i get BTP to configure for my mash tun which has a .75 gallon dead space. I want it to configure it with my mash water for the amount. I mean if I normally mash with 1.32 quarts per pound, how do I get it to add it to the water amount with me doing it manually. When I used beersmith, it would configure it for me.

Thanks
ERik
bruerik
Light Lager
Light Lager
 
Posts: 32
Joined: Wed Nov 08, 2006 10:12 pm
Location: Sauk Rapids, MN

dead space

Postby slothrob » Mon Jul 23, 2007 10:05 am

BTP considers Dead Space in the Mash Tun to be part of the mash, but simply not drainable. As the program exists, I don't believe you can get it to automatically change the values the way you want them to change.

You will need to allow the program to automatically calculate your volume for a 1.32 qt/# thickness, then add ).75 gallons to the result.

If it's any consolation, It's questionable whether there is really much effect on the mash within the range of 1 to 2 qt/#, so not accounting for the dead space shouldn't change your results much. Temperature is a much more significant factor.

Also, as long as there is exchange between the liquid in the dead space and the liquid in the grain. the effect of the dead space on changing the thickness would be lessened considerably. Enzymes and sugars will diffuse between the mash and dead space during the mash.
BTP v2.0.* Windows XP
User avatar
slothrob
Moderator
Moderator
 
Posts: 1769
Joined: Mon Apr 10, 2006 1:36 pm
Location: Greater Boston


Return to BeerTools Pro General Topics

Who is online

Users browsing this forum: No registered users and 2 guests

cron